Idiomas disponibles
Idiomas disponibles
j)
Turn off the engine before refueling as well as before checking and topping up
the engine oil.
k)
Working air pressure in wheels: 1 bar (maximum allowable 1.6)
l)
Service interval table:
Procedure
Interval
Checking the engine
oil level
General condition of
the machine
Sharpness of digging
wedges
Lubrication of the
chain guides
Drive belt inspection
Gear lubrication
Tire pressure control
Checking
condition and cooling
of the engine from
the outside
Change engine oil
Replacing
the
filter
Replacing the spark
plug
For detailed service procedures, see the separate operating manual of the
engine manufacturer.
m) Prolonged non-use of the machine:
If the machine is not used for more than a month, it is necessary to:
Empty the fuel from the tank or add a fuel stabilizer to it according to
•
the manufacturer's proportion of the additive.
NOTE: do not keep fuel in a tank with a stabilizer for longer than the
manufacturer of the additive recommends!
(only if the fuel is emptied from the tank) Start the engine and let it
•
run without load until it shuts down on its own due to lack of fuel -
this will allow the residual fuel to empty from the fuel system and
carburetor.
Before use:
X
X
X
X
X
the
After 5
operating
hours from
first start
air
Every
3
After
working
hours
hours
operation
X
After every
25
100 hours
of
of
operation
X
X
X
X
X
