Idiomas disponibles
Idiomas disponibles
IMPORTANT: if the digging unit is blocked during operation, turn off the
engine, clean the digging mechanism or remove anything that has blocked the
chain. Only after removing the obstacle can you restart the machine and
continue working, with both ignition switches (on the engine and the steering
wheel) "ON" position.
In an emergency, pressing the stop lever on the steering wheel turns the
machine off immediately.
3.4.
Cleaning and maintenance
a)
Before each cleaning, adjustment or replacement of accessories, and also
when the unit is not in use, turn off the machine (additionally disconnect the
spark plug) and cool it down completely.
Wait until the rotating parts stop.
•
b)
Use only non-corrosive cleaning agents for cleaning surfaces.
c)
Clean the device after each use.
d)
After each cleaning, all the parts should be dried well before the unit is used
again.
e)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
f)
Make sure that no water enters through the ventilation openings in the casing.
g)
Clean the ventilation openings with a brush and compressed air.
h)
Perform regular inspections of the unit checking technical fitness and any
damages.
i)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) for
cleaning as they may damage the surface of the appliance material.
