Service Intervals - Atlas Copco ETV STR61-50-B10 Instrucciones Del Producto

Product information
- Exploded views
ServAid facilitates the ordering process of spare parts, service tools and accessories for the product of
your choice. It is continuously updated with information of new and redesigned products.
You can use ServAid to present content in a specific language, provided that translations are available,
and to display information about obsolete products. ServAid offers an advanced search functionality of our
entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
For further information contact your Atlas Copco sales representative or e-mail us at:
[email protected]
Product safety video for nutrunners
Learn more about safety features on Atlas Copco nutrunners and what measures the operator has to take
for a safe operation. Click the link or scan the QR code below to view the video:
http://www.atlascopco.com/videogallery/#detail/77f67648-30f0-4b92-bab6-885ea6b054db
Overview
The Tensor system
The Tensor system consists of a range of tightening tools powered by brushless electric motors and differ-
ent drive units.
Motors are available in different sizes. All tools are protected from overheating of the motor. Electrical pro-
tection system is based on an earth fault circuit brake, Earth Fault Protector (EFP). The EFP senses small
current leakage (>30mA) and if leakage occurs, the drive is switched off (30ms). Changing, interfering or
tampering with the protection system voids all warranty and obligations from Atlas Copco. Trouble-shoot-
ing and re-start of the system may only be carried out by an authorized person. Check the function of the
EFP on a regular basis by pressing the trip-button. The EFP should switch off accordingly.

Service intervals

Service recommendations
Overhaul and preventive maintenance is recommended at regular intervals. See the Preventive mainte-
nance section for detailed information regarding overhaul of your tool and specific parts. If the machine is
not working properly, it should immediately be taken away for inspection. At the overhauls, all parts should
be cleaned accurately and defective or worn parts should be replaced.
4
EN
© Atlas Copco Industrial Technique AB - 9836 9815 00
ETV STR61-50-B10