Piusi EX50 Manual Para El Uso Y El Mantenimiento página 27

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
EN (Translation of the original language)
10
INSTALLATION
WARNING
PRELIMINARY
- Verify that all components are present. Request any missing parts from the manu-
INSPECTION
facturer.
- Check that the pump has not suffered any damage during transport or storage.
- Carefully clean the suction and delivery inlets and outlets, removing any dust or
other packaging material that may be present.
- Check that the electrical data corresponds to those indicated on the data plate.
- Always install in an illuminated area.
- Install the pump at a height of min. 80 cm.
WARNING
10.1
POSITIONING, CONFIGURATIONS AND ACCESSORIES
NOTICE
WARNING
This manual belongs to PIUSI S.p.A. Whole or partial reproduction of this manual is forbidden.
BEFORE ANY OPERATION, ENSURE TO BE OUT OF POTENTIALLY EX-
PLOSIVE AREAS
THE PUMP MUST NEVER BE OPERATED BEFORE THE DELIVERY AND
SUCTION LINES HAVE BEEN CONNECTED.
TIGHTEN THE ELECTRICAL BOX TO ENSURE PROTECTION AGAINST
THE RISK OF EXPLOSION
THE RIGHT CLAMPING SCREWS COUPLE THAT GRANTS THIS PRO-
TECTION IS 10Nm
IN THE EVENT OF LOSS, USE ONLY SCREWS OF RESISTANCE CLASS 8.8
OR HIGHER
IF VALVES IN THE CIRCUIT ARE TO BE INSTALLED, MAKE SURE THEY
ARE EQUIPPED WITH OVERPRESSURE SYSTEM.
CLEAN
THE
TANK
VENTILATED (RECOMMENDED OPENING PRESSURE:
APPLY THE QUICK COUPLING TO THE TANK CORRECTLY AND SAFELY
DO NOT BLOCK THE DRAINAGE HOLES (det. A exploded view page 127)
The pump must be secured in a stable manner.
The pump is for fixed function.
It must be permanently fixed and protected from direct sunlight.
It is the installer's responsibility to provide the line accessories necessary
for the safe and proper functioning of the pump. The accessories that are
not suitable to be used with the previously indicated material could dam-
age the pump and/or cause injury to persons, as well as causing pollution.
To maximise performance and prevent damage that could affect pump
operation, always demand original accessories.
EX50 - EX75 12V
AND
MAKE
SURE
IT
IS
WELL-
3 psi
27
27 /132
/124
loading

Productos relacionados para Piusi EX50

Este manual también es adecuado para:

Ex75