Scheppach HC550TC 400V Traduccion Del Manual De Instrucciones Originales página 26

• Avoid accidental starting of the machine: the
operating button may not be pressed when
inserting the plug in an outlet. Use the tool that is
recommended in this operating manual. This is
how to ensure that your machine provides optimum
performance.
• Keep your hands away from the work area, when the
machine is in operation.
7. Technical data
Mains connection
Motor power
Operating mode
Motor speed
Pressure vessel capacity
Operating pressure
Theo. intake capacity
Effective delivery quantity
Protection category
Device weight
Oil (15W 40)
Max. installation altitude (above
sea level)
Belt type
Technical changes reserved!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
wa/pA
8. Unpacking
• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
26 | GB
• Check the device and accessory parts for transport
• If possible, keep the packaging until the expiry of the
• Familiarise yourself with the product by means of the
• With
• When ordering please provide our article number
400 V / 50Hz
3000 W / 4 PS
S1
m WARNING!
2900 min
-1
The device and the packaging material are not
100 l
children's toys! Do not let children play with
plastic bags, films or small parts! There is a
10 bar
danger of choking or suffocating!
550 l/min
9.
350 l/min
IP32
m ATTENTION!
79,6 kg
Always make sure the device is fully assembled
before commissioning!
1,2 l
You require the following for assembly:
1000 m
• Open-ended spanner 12 mm (not included in the
A-1400
• Open-ended spanner 14 mm (not included in the
• Open-ended spanner 17 mm (not included in the
• Allen key 4 mm (not included in the scope of supply)
• Cross-screwdriver (not included in the scope of
9.1 Fitting the wheels (Fig. C)
97 dB(A) Insert the screw (23) through the wheel (14). Now insert
81,7 dB(A) the screw (23) through the mount on the pressure
2,2 / 3 dB(A) vessel (12). Now insert the screw (23) with the nut (24).
Repeat the process on the other side of the pressure
vessel (12).
9.2 Fitting the foot (2x) (Fig. D)
Insert the screw (25) through the foot (13). The foot (13)
is subsequently fitted on the mount on the pressure
vessel (12).
Fasten the foot (13) with the nut (26).
Repeat the process for the second foot.
www.scheppach.com
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
warranty period.
operating instructions before using for the first time.
accessories as
and replacement parts use only original parts.
Replacement parts can be obtained from your dealer.
as well as type and year of manufacture for your
equipment.
Assembly
scope of delivery)
scope of delivery)
scope of delivery)
supply)
well as wearing parts