Idiomas disponibles
Idiomas disponibles
7.6. ON-LINE MONITORING OF THE
INSTALLATION.
The EQX2 inverter provides a monitoring port that can gather and
transmit data from the inverter to the monitoring platform through
an external monitoring device.
To do so, download and register in the application (Fig. 66) and
register the installation (plant) in the EQX-sun application (Fig. 67).
If there are download problems, contact your distributor or
SALICRU´s technical support.
7.6.1. Download and register the "EQX-sun" app.
Download the EQX-sun app and install it on the smartphone or
tablet of the end user of the EQUINOX solar inverter.
Fig. 66. Application home screen.
USER MANUAL
This process can take a few minutes.
Once complete, open the EQX-sun
app.
A home screen will appear to enter
the credentials if you are already
a user or to register a new user:
2
1
3
1
To register a new user, click above the text
"Register" so that the application allows you to complete
the necessary fields to process the registration and be
able to use the application.
A demo version of the application is available.
To open it, press the "Demo" button on the
bottom right of the screen.
2
Once the registration process is complete, access the
application by entering the credentials that have been defined
by pressing the "Login" button.
If the email address or password entered is incorrect,
the following error message will be displayed at the bottom
of the screen:
3
If you have forgotten your password, click on "Recover
password?" to open the following screen:
4
Enter the email address with which the plant was registered.
A message with the sender "[email protected]"
and the subject "Equinox – Reset password" will be sent to
that email address.
5
The message will include a 6-digit "Token" code. Enter the
code on the code verification screen and press submit.
6
A screen will appear to enter a new password. You need
to enter it twice. Press the "Save" button when finished.
4
5
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
93
