Idiomas disponibles
Idiomas disponibles
A network symbol appears in the middle at the top of the screen
and a green indicator is displayed on the screen to indicate that
the network function is activated.
It is possible that the network symbol is displayed in orange
and the indicator in red. This can occur because the function
is not (yet) activated on the other generator(s) and the actual
connection has not yet been made.
The mask shows which connection(s) is/are active.
Setting generator(s) as client:
Touch the box under "Network ID". A numerical keypad is
displayed. Enter a number between 2 and 10 followed by "OK"
here. The following screen appears.
A network symbol appears in the middle at the top of the screen
and a green indicator is displayed on the screen to indicate that
the network function is activated.
It is possible that the network symbol is displayed in orange
and the indicator in red. This can occur because the function
is not (yet) activated on the other generator(s) and the actual
connection has not yet been made.
The mask shows which connection(s) is/are active.
38
Repeat these steps if further clients (generators) are to be
coupled.
All active connections are displayed on the screen.
NOTE!
If there are several generators (clients), the numbers 2 to 10
may only be used once.
16.2 Function of generators in coupled state
As soon as all connections have been made and are active,
activate all the generators on the settings screen (heating screen)
by pressing
"Back / previous screen" and quit the system
settings.
Schaeffler Technologies
