Hilti PP 100 Manual De Instrucciones página 24

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2
Symbols in the operating instructions
The following symbols are used in these operating instructions:
Comply with the operating instructions
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
Hilti Li­ion battery
Hilti charger
1.2.3
Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these operating instructions.
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text.
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
These characters are intended to specifically draw your attention to certain points when handling
the product.
1.3
Product-dependent symbols
1.3.1
Symbols on the product
The following symbols can be used on the product:
The product supports near-field communication (NFC) technology compatible with iOS and
Android platforms.
1.4
Laser information on the product
Laser information
1.5
Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
18
English
Laser radiation: The product conforms to laser class 3R based on standard
IEC / EN 60825-1:2014 and conforms to CFR 21 § 1040 (Laser Notice 56).
Do not look straight into the laser beam. If you do inadvertently look into the
laser beam, immediately close your eyes and move your head clear of the
laser beam.
2354475
*2354475*
loading