Product Description; Technical Data; Figures Used; Putting Into Operation - Abicor Binzel xFUME PRO Manual De Instrucciones Original

3 Product description

3 Product description
3.1

Technical data

Tab. 1 General torch data (EN 60974-7)
Temperature
(transport and storage)
Temperature (operation)
Relative humidity
Type of use
Type of voltage
DC polarity of the electrodes
Tab. 2 Product-specific torch data (EN 60974-7 and EN ISO 21904-1)
®
Type Type of xFUME PRO
cooling
Load
CO M21
2
A A
25 Air - -
24
Air 270 250
36 Air 330 300
501
Liquid 500 450
1When used with welding fume extraction systems of the xFUME series
The volume the torch-integrated extraction system collects depends on many
factors, such as the position of the suction nozzle, the welding geometry
and the gas emission rate of the welding process. Under optimum conditions,
Tab. 3 Liquid cooling/cable assembly specifications
Cooling data
Supply temp. Max. 40°C
Flow Min. 1.5 l/min
Flow pressure
Min. 2.5 bar/max. 3.5 bar
Coolant connection Plug-in nipple, nom. diam. 5
Cooling unit power
Min. 800 W
3.2

Figures used

All figures can be found at the start of this document.
4

Putting into operation

WARNING
Health risk caused by inhaling harmful dust
The device contains harmful dust that can collect on surfaces and penetrate the ambient air as of the first use. This can damage the respiratory tract when
inhaled.
► Check and wear your personal protective equipment.
► Only use the device in rooms with sufficient ventilation.
► The provided fume extraction system must be used when operating the device.
► Immediately remove dust deposits from the environment with a dust class H industrial vacuum cleaner or a damp cloth.
► If possible, keep the air slide closed and only open it briefly.
WARNING
Electric shock due to touching live components
Touching live equipment parts may result in potentially fatal electric shocks.
► Only hold and move the welding torch using the intended handle piece.
EN - 32
−25°C to +55°C
−10°C to +40°C
Up to 90% at 20°C
Manual
DC
Usually positive
®
xFUME Duty Wire Ø
COMPACT cycle
Load
CO M21
2
A A % mm
250 230 35 0.8–1.2
- - 60 0.8–1.2
- - 60 0.8–1.2
- - 100 1.0–1.6
Shielding gas (DIN EN ISO 14175)
Wire types
Voltage rating
Protection type of the device
connections (EN 60529)
Control devices in handle
Gas flow Volume flow
rate
Suction nozzle
3
l/min m /h
10–20 46
10–20 70
10–20 58.7
10–20 58.7
more than 95% of the welding fumes can be collected according to
ISO 21904-3.
Cable assembly
Standard length L
Control lead
® ®
xFUME PRO/xFUME COMPACT
CO and mixed gas M21
2
Commercially available round
wires
Peak value of 113 V
IP3X
For 42 V and 0.1–1 A
1
Required negative
pressure at
the connector
For induced speed 0.35 m/s
Connector
3
m /h kPa
85 11.4
92.8 11.4
75.8 5.8
81.3 6.6
4.00 m, 5.00 m
2-wire