Idiomas disponibles
Idiomas disponibles
Open battery compartment for maintenance
• The machine must be switched off and the key must be re-
moved.
Warning:
Before opening the battery compartment make sure
that both tank areas are empty.
• Lower the suction nozzle.
• At the bottom left and right on the
front side of the machine you will find
the battery compartment release.
• Unscrew both screws and remove
them.
• Stand on the left side of the machine.
• Hold the recessed grip (1) with one
1
hand and the driving handle (2) with
the other and carefully open the bat-
2
tery compartment until the driving
handle lies on the ground.
Warning:
After maintenance, carefully bring the tank back to
its initial position and reattach the screws.
Notice:
Lift the suction nozzle again
Notice:
Put the key back in place.
Prior to commissioning
Check emergency stop
Caution:
The key switch functions as an EMERGENCY OFF
and is an important safety element.
- Therefore, the function of the button must be checked
regularly in short time intervals, before using the ma-
chine.
• Switch on the machine by pushing the key switch in.
• Take the driving handle and position the hands in such a
way that you can work easily with them.
• By gently pushing the driving switch into the direction of
movement the machine is set into motion.
• Remove the key switch while driving.
Caution:
All functions of the machine are thereby deactivat-
ed.
The machine is not actively braked but rolls out to a
standstill.
- Always keep your hands on the driving handle until
the machine comes to a complete standstill.
Danger:
If one of these functions is not working, the ma-
chine must be decommissioned until it can be pro-
fessionally repaired by an authorized TASKI
service partner.
92
Operator and Power User
Notice:
Two keys are always supplied with the machine.
Power User key (gray)
• The Power User can make advanced basic settings via the
Power User menu.
Operator key (orange)
• The Operator can make the necessary settings for operat-
ing the machine.
Power User Menu
Notice:
The Power User menu can only be activated by us-
ing the Power User key (gray).
Control panel:
Notice:
To activate the Power User menu on the control
panel, all functions must be switched off.
If a function such as Vacuum cleaner, Eco mode, Tool,
etc. is active, the Power User menu is not accessible.
• Switch the machine on.
• Pressing the ECO mode button and
the Cleaning solution supply button
simultaneously activates the Power
+
User menu in the display.
Relocation drive
• Switch on the machine (key switch).
• Take the driving handle and position the hands in such a
way that you can work easily with them.
• By gently pushing the driving switch
into the direction of movement, the
machine is set into motion. If you let
go of the driving switch, the machine
will stop.
Brush installation
Before inserting, please check:
• that the brush does not fall below the red marking (bristles)
or 1cm of bristle length.
• the pad for wear and cleanliness before use.
Caution:
Do not use brushes which have reached their wear
limit. The wear limit is indicated by the length of the
red bristle. Do not use worn or contaminated pads.
Use original TASKI brushes only.
Failure to observe these instructions may result in inad-
equate cleaning results or even floor damage.
