Idiomas disponibles
Idiomas disponibles
• Check the float to make sure it is fully
functional and repair any fault
• After you have finished emptying the tanks, close the red
and blue cover back on and hang the hoses on the holder.
• Reassemble the dirt sieve (yellow) and the suction filter.
Caution:
Clogged suction filters may impair the suction per-
formance.
Cleaning the fresh water tank filter
Caution:
Clean the fresh water tank filter after the end of op-
eration.
Clogged filters can inhibit the supply of detergents and
thus lead to surface damage.
• The machine must be switched off.
• Unscrew the fresh water tank filter
and remove it.
• Rinse the filter thoroughly with clean
water.
Notice:
The filter is lower than the drain hole of the tank. A
rest amount of cleaning solution will run out only
when the filter is removed.
• Put the filter back and twist it closed.
Removing and cleaning the brush
Notice:
Clean the brush whenever cleaning work is com-
pleted.
• The machine must be switched off.
Single disc Deck:
• Rotate the tool counterclockwise
away from the tool connection using
your foot.
Double disc Deck:
• Push the tool ejector briefly but firmly
with your foot.
Roller brush Deck:
1
3
• Remove the brushes and clean them under running water.
Cleaning the machine
Caution:
Never clean the machine with a high-pressure
cleaner or water jet.
Water ingress in the machine may cause considerable
damage to the mechanical or electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in opera-
tion)
Caution:
The machine must be switched off. Remove the key.
Notice:
Store the machine with a lifted suction nozzle, lifted
brush and open tank lid.
Thus, the tank can dry, and the generation of mold and
unpleasant odors is prevented.
Caution:
Never store the machine with uncharged batteries.
Otherwise, the batteries will be damaged beyond repair.
• Open the tank cover, carefully push
om the tank cover release [1] and
2
lower the tank cover [2] until it rests
on the tank.
1
2
97
