Hilti DX 2 Manual De Instrucciones página 35

13 EC declaration of conformity (original)
Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2011/65/EU.
14 Confirmation of CIP testing
The following applies to C.I.P. member states outside the
EU and EFTA judicial area: The Hilti DX 2 has been system
and type tested. As a result, the tool bears the rectangular
PTB approval mark showing approval number S 830. Hilti
15 Health and safety of the operator
15.1 Noise information
Powder-actuated fastening tool
Type
Model
Caliber
Application
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Noise (power) level, L
WA, 1S
Emission noise-pressure level in the work station,
L
2
pA, 1s
Peak sound pressure emission level, L
1 ± 2 dB (A)
2 ± 2 dB (A)
3 ± 2 dB (C)
Operation and set-up conditions: Set-up and operation of the powder-actuated fastening tool in accordance with
E DIN EN 15895-1 in the semi-anechoic test room of Müller-BBM GmbH. The ambient conditions in the test room
conform to DIN EN ISO 3745.
Testing procedure: Enveloping surface method in anechoic room on reflective surface area in accordance with
E DIN EN 15895, DIN EN ISO 3745 and DIN EN ISO 11201.
Powder-actuated fasten-
ing tool
DX 2
01
2014
1
3
pC, peak
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Manage-
ment
BU Direct Fastening
02/2014
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
thus guarantees compliance with the approved type.
Unacceptable defects or deficiencies, etc. determined
during use of the tool must be reported to the person
responsible at the approval authority (PTB) and to the
Office of the Permanent International Commission (C.I.P.).
DX 2
Serial
6.8/11
Fastening 20 mm laminated wood to concrete (C40)
with the X-U47 P8
101 dB (A)
104 dB (A)
139 dB (C)
en
Lars Taenzer
Head of BU Direct Fastening
BU Direct Fastening
02/2014
29