Preparation For Operation; Working With The Unit - Royal Catering RCPHW 650 Manual De Instrucciones

9 - Handle
10 - Bun skewers (not available for the RCPHW 450)
11 - RESET button
12 - Equipotential bonding terminal
13 - Power cord
3.2.

Preparation for operation

POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 10 cm from any wall of the unit. Keep the unit away from
any hot surfaces. Always operate the unit on a level, stable, clean, fireproof and
dry surface and out of the reach of children and persons of impaired mental,
sensory and intellectual functions. Place the unit in such a way that the mains plug
can be reached at any time. Ensure that the power supply to the unit corresponds
to that specified on the identification plate!
Before using the unit for the first time, disassemble all parts and wash them as
well as the entire unit.
EQUALIZING CONNECTION TERMINAL
There is an equipotential bonding terminal [12] on the back of the unit which must
be properly connected to the equipotential bonding system before using the unit.
This operation should be carried out by a qualified electrician.
3.3.

Working with the unit

1) Connect the unit to the power supply.
2) Fill the water tank (4) with water to about ¾ of its height.
3) Start the appliance by turning the main switch (6) to the "ON" position.
4) Select the desired temperature by turning the knob (5). The heating element
will begin to heat the glass cylinder.
5) Set the bun skewers heating switch (8) to the "ON" position. The bun skewers
(10) will begin to heat up.
6) The bun skewers must be properly heated before use. As soon as the desired
temperature is reached, the orange LED (7) goes out and the heating element
stops heating.
7) As soon as the temperature of the appliance drops again, the appliance will
automatically start heating again.
8) When you have finished working with the appliance:
a) turn the thermostat knob (5) to the "OFF" position,
b) switch off heating of the skewers with the button (8),