Stahlwille Manoskop 730N Instrucciones De Utilizacion página 39

Using the torque wrench
Only use the Manoskop
Hold the handle only in the middle. Apply
force at a tangent to the swivel radius and
at right angles to the axis of tightening.
Pull steadily and without any interruption,
particularly during the final phase, until
you feel a jerk and hear a click. The torque
level set on the scale has now been
reached.
ã
D ANG ER !
Before you use the
wrench, check that the
cut-out value is set to
the correct level and that
the insert tool is firmly in
place. Apply the tool in
such a way that it cannot
slip off the nut or bolt.
Otherwise, there is a
danger of injury or
damage.
®
by the handle.
39