Idiomas disponibles
Idiomas disponibles
Controlled counter
clockwise tightening
For reasons of accuracy, these torque
wrenches have been designed to work in
only one direction. The direction is
marked with an arrow.
Controlled counter clockwise tightening is
possible by turning the Manoskop
For controlled counter clockwise
tightening using the Manoskop
insert tool has to be rotated through 180° .
Ratchet insert tools also need switching to
„L" (CCW) for the correct tightening
direction.
Uncontrolled loosening of
nuts & bolts ...
... opposite to the tightening direction is
possible. The cut-out mechanism is not
placed under load during this process.
38
ã
C AUTI O N !
Important! Never exceed
a limit of 130% of the
maximum scale reading.
Do not use the tool for
loosening rusty nuts and
bolts. This may cause
damage to the torque
wrench. After such an
overload, the readings
may be inaccurate in
such a way that the user
does not notice.
®
over.
®
730N the
