Dolmar SP-7650.4 R Manual De Instrucciones Original página 6

Ocultar thumbs Ver también para SP-7650.4 R:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 137
Starting up the mist blower
lease make sure that there are no children or other people within a working range
o 20 meters 66 eet 6 , also pay attention to any animals in the working icinity.
Ne er use the mist blower in urban areas.
Be ore operating, always check that the mist blower is sa e or operation
Check the security o the throttle trigger. he throttle trigger should be checked or
smooth and easy action. Check or proper unctioning o the throttle trigger lock.
Check or clean and dry handles and test the unction o the l-
handles ree o oil and uel.
o reduce the risk o leakage and skin contact with chemicals, check that the
container cap and all connections in the path o the spray are tight, and be sure
the hose is securely attached and in good condition. Keep the solution discharge
le er closed.
Make sure that the solution discharge le er is closed be ore starting the machine.
Check that the spark plug cap is securely mounted on the spark plug
plug cap may cause arcing that could ignite combustible umes and cause a re.
Check condition o harness straps and replace damaged or worn straps.
Adjust shoulder strap to suit your si e be ore starting work.
n an emergency, you may slip out o the shoulder strap and throw o the machine
uickly. ractice slipping out o the harness a number o times be ore using the
machine in order to become accustomed to it. o not throw o the machine while
practicing as it could damage the machine.
hen you pull the starter handle, do not wrap the starter rope around your hand.
o not let the starter handle snap back, but guide the starter rope to rewind it
properly.
ailure to ollow this procedure may result in injury to your hand or ngers and may
damage the starter mechanism.
he assistance o another person may be needed in placing the mist blower on
your back a ter starting. n order to reduce the risk o injury to the assistant rom
thrown objects, chemical spray li uid or rom contact with hot e haust umes, keep
the engine at idle speed during this brie period, and do not let your assistant stand
in the area o the outlet no le or e haust.
started and operated without assistance.
Start the mist blower only in accordance with the instructions.
o not use any other methods or starting the engine 7
se the mist blower and the accessories supplied only or applications speci ed.
Start the mist blower engine only a ter the entire machine has been assembled.
peration o the machine is permitted only a ter all the appropriate accessories
are attached.
he engine is to be switched o immediately i there are any engine problems.
se the mist blower or single-handed operation with the right hand on the control
handle. Carry as a backpack with the shoulder straps o er both shoulders.
o reduce the risk o loss o control, ne er carry the mist blower with the strap s
o er one shoulder.
hen working with the mist blower, always wrap your ngers tightly around the
handle, keeping the control handle cradled between your thumb and ore nger.
Keep your hand in this position to ha e your machine under control at all times.
Make sure your control handle is in good condition and ree o moisture, pitch, oil
or grease.
Always ensure a sa e, well-balanced ooting.
n order to keep the solution tank upright and reduce the risk o spillage, do not
bend at the waist. Bend only at the knees and support yoursel as re uired to
ensure proper balance.
emember that a mist blower lled with li uid has a signi cant amount o weight.
se e tra caution when bending, leaning or walking.
perate the mist blower in such a manner as to a oid inhalation o the e haust
gases. Ne er run the engine in enclosed rooms risk o su ocation and gas
poisoning . Carbon mono ide is an odorless gas.
Always ensure there is ade uate entilation.
our mist blower is not insulated against electric shock. o reduce the risk o
electrocution, ne er operate this mist blower in the icinity o any wires or cables
power, etc. which may be carrying electric current.
electrical installations.
switch. Keep
a loose
therwise, the mist blower should be
o not spray on or near
6
(
)
( )
( )
loading