Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Be ore making a re uest or repairs, check a trouble or yoursel .
o this manual. Ne er tamper or dismount any part contrary to the description. or repairs, contact Authori ed Ser ice Agent or local dealership.
State of abnormality
Engine does not start.
Engine stops soon.
Engine speed does not increase.
Engine does not stop.
un engine at idling, and set choke le er to
C
SE.
hen the engine does not start a ter warm-up operation
there is no abnormality ound or the check items, open the throttle by about 1 3 and start the engine.
any abnormality is ound, control your machine according to the description
Probable cause (malfunction)
-
switch is set to S
.
ailure to operate primer pump.
ow pulling speed o starter rope.
ack o uel.
ncorrect choke position.
Clogged uel lter.
Bent or blocked uel tube.
eteriorated uel.
E cessi e suction o uel.
etached plug cap.
Contaminated spark plug.
Abnormal clearance o spark plug.
Abnormality o spark plug.
Abnormal carburetor.
Starter rope cannot be pulled, or no
compression is elt.
Abnormal dri e system electric system.
-
switch ault, wiring ault, connector
ault, etc. .
nsu cient warm-up.
Choke le er is set to C
SE although
engine is warmed up.
ow idle speed.
Clogged uel lter.
Contaminated or clogged air cleaner.
Abnormal carburetor.
E haust mu er ault clogged etc. .
Abnormal dri e electric system.
etached throttle wire.
etached connector.
Abnormal electric system.
28
Remedy
Set the -
switch to S A
.
ush 7 to 10 times.
ull strongly.
eed uel.
Set to C
SE cold start .
Set to
EN warm start .
Clean.
Straighten or replace uel tube.
eteriorated uel makes starting more di cult.
eplace with new one.
ecommended
replacement 1 month
Set throttle le er rom medium speed to high
speed, and pull starter handle until engine
starts.
engine will not start still, remo e spark plug,
make electrode dry, and reassemble them as
they originally are. hen, start as speci ed.
Attach securely.
Clean.
Adjust clearance.
eplace.
Make re uest or inspection and maintenance.
Make re uest or inspection and maintenance.
Make re uest or inspection and maintenance.
er orm warm-up operation.
Set to
EN .
Adjust idle speed.
Clean.
Clean.
Make re uest or inspection and maintenance.
Make re uest or inspection and maintenance.
Make re uest or inspection and maintenance.
Attach securely.
Attach securely.
Make re uest or inspection and maintenance.
