Idiomas disponibles
Idiomas disponibles
2) If there is residual heat indication in the
display which is OFF, "H" will be displayed.
3) Even lock function is active you can switch
OFF a zone.
4) If only one heater is active and this one is
switched off, 4 Short beep will be heard
indicating all cook top is Off.
Increase / Decrease power level
With a short press on '+' or '-' keys, Increase or
decrease power in the selected zones digit: 0-
1-2-3...9-P
1. For Long Presses in + or - keys, power level
increases /decreases continuously. With a
fast increase, power stops at level 9, and for a
higher power another short press is needed
on the + key. No beep sound is heard with fast
increase / decrease.
2. Once arrived to P power level, pressing + key
again does not change power level to 0.Once
arrived to 0 power level, pressing - key again
does not change power level to P.
3. With a zone ON at 0 power level, if the zone is
hot, 0 will blink alternatively. After 10
seconds, 0 will disappear an 'H' letter will
appear fixed on display.
4. When a heater is selected and '+' & '-'keys are
touched at the same time, power level will go
to '0' but heater will maintain selected during
10 seconds. If heater was temporized, timer
will go to Off. This action can only be
developed in several cases depending touch
control configuration.The following
examples are for information only. Personal
experience should then let you adapt these
settings to your taste and habits.
Child Lock
The action will be done when lock key is touched
Then, any time when a key will be touched,
displays will show "L" during 2sec. heating
remains at the same state.
To deactivate Child Lock, follow the same
process explained before. Then Short beep will
be heard and displays will show "n" letter. Hob will
remain unlocked.
Note: An automatic child lock will produce in 15
minutes after total Switch OFF of the hob. This
function will happens automatically but
previously is necessary to program it. See User
settings point.
Double / Triple zones
To switch ON double extension ring, associated
main zone must be already ON and Indicating
power level must be higher than 0.
8.1- Double zone ON
1st Short Press on extension key Switches ON
extension ring. LED over extension key turns
ON if Extension ring is ON.
2nd Short Press on extension key Switches OFF
extension ring.
Short beep each press on extension key.
8.2- Triple zone ON
1st Short Press on extension key Switches ON
1st extension ring. 1 LED over extension key
turns ON if 1st extension ring is ON (left LED in
case of triple zone, middle and only LED in case
of double zone) 2nd Short Press on extension
key Switches ON 2nd extension ring. 2 LEDs
over extension key turn ON if 1st and 2nd
extension rings are ON 3rd Short Press on
extension key. Switches OFF 1st and 2nd
extension rings.
Short beep each press on extension key.
GB 63
