Hilti UH 700 Manual De Instrucciones Original página 10

1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols can be used on the product:
Wear a hard hat
Wear eye protection
Wear light respiratory protection
Wear ear protection
Wear protective gloves
Hammer drilling
Drilling without hammering, 1st gear
Drilling without hammering, 1st gear
Amps
Hertz
Volts
Watts
Alternating current
Double insulated
Revolutions per minute
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Hammer drill
Generation
Serial no.
2 Safety
2.1 General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
2 English
UH 700
01
273762
*273762*