Dometic POWER & CONTROL DTB01 Guía Breve De Instalación página 8

• Installation on boats or yachts
• Stationary or mobile use
• Indoor use
The display not suitable for:
• Mains operation
• Outdoor use
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible
failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
6 Installation
Mounting the display
NOTICE! Damage hazard
• Using the wrong cables can lead to excessive overheating of the cables, high voltage drops
and possible failures. Only use cables with a suitable cross-section and that can withstand the
current.
• To avoid radio interference, do not install the display near metal parts or in an area with high
levels of electrical automation and high-frequency devices.
• Ensure that the screws are horizontal to each other.
• Ensure that the electronics board is mounted the right way round. The button must be on the
bottom of the electronics board.
Install the display as shown.
fig. 1 on page 1
Connecting the display
Connect the display as shown.
fig. 2 on page 2
7