Dometic POWER & CONTROL DTB01 Guía Breve De Instalación página 7

Ocultar thumbs Ver también para POWER & CONTROL DTB01:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
4
Safety Instructions
WARNING! Electrocution hazard
Installation and removal of the device may only be carried out by qualified personnel.
Do not operate the device if it is visibly damaged.
This device may only be repaired by qualified personnel. Improper repairs can result in con-
siderable hazard.
WARNING! Fire hazard
Keep the ventilation openings on the device housing or in installations free of obstructions.
WARNING! Health hazard
This appliance can be used by children aged from 8 years and above and persons with re-
duced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
WARNING! Explosion hazard
Do not store any explosive substances, such as spray cans with propellants, in the device.
NOTICE! Damage hazard
Protect the device and cables against heat and moisture.
Do not expose the device to rain.
Do not install the device in a dusty environment.
Make sure that the mounting surface is capable of supporting the weight of the device.
Use ductwork or cable ducts if it is necessary to lay cables through metal panels or other pan-
els with sharp edges.
Fasten the cables securely.
Do not pull on the cables.
5
Intended use
The display is intended to control N-BUS or CI-BUS devices and to monitor energy parameters while driving.
The display is intended to be used as an optional device with the following N-BUS or CI-BUS devices:
Batteries
Chargers
Solar panels
The display is suitable for:
Installation in recreational vehicles
6
loading