Unscrew the cap of the tank and fill it with
the desired liquid;
CAUTION: Each tank can hold liquids
up to a maximum of 500 ml.
Check that the small tube inside the cap
is properly installed, then screw the cap
onto the tank;
CAUTION: Check that the female
coupling of the tank cap is clean and
free from obstructions.
CAUTION: Check that the male
coupling on the appliance core unit is
clean and that its O-rings are not worn.
CAUTION: Use the support only
to install the Mectron 500 ml tank and
to stow the handpiece. Do not use the
support for other purposes.
Holding the tank in a vertical position,
insert it on the machine core unit of the
device until it comes into contact;
CAUTION: Do not overturn the tank,
the cap is not watertight. The outflow
of physiological solution or aggressive
liquids may cause damage to the
surfaces.
5
6
7
INSTALLATION
19