Flush Function; Ultrasound - Scaler Part - Mectron combi touch Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para combi touch:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

combi touch
6

FLUSH FUNCTION

Using the "flush" function it is possible to refill or rinse the irrigation circuit.
CAUTION: Flush function.
The "flush" function must be used after each
treatment, before starting the cleaning and
sterilisation procedures.
6.1
ULTRASOUND - Scaler Part
Fill the tank with the appropriate liquid.
Depending on the purpose of the FLUSH,
different liquids can be used:
• If the tank irrigation circuit needs to
be filled, use the solution suited to
the treatment;
• If the tank irrigation circuit needs
a rinse cycle, use water, preferably
demineralised.
Connect the tank to the device;
Extract the scaler handpiece from its
housing;
CAUTION: Make sure the polisher
handpiece is stowed in its housing,
otherwise the system will remain
inactive.
40
CAUTION: If the tubes are not rinsed,
the crystallisation of the salts may seriously
damage the appliance.
1
2
3
Tabla de contenido
loading

Tabla de contenido