Eliminating The Condensate; Cleaning The Powder Containers And Caps - Mectron combi touch Manual De Uso Y Mantenimiento

9.3

Eliminating the Condensate

The appliance has an air filter, which intercepts any impurities and the condensate present in
the pneumatic circuit.
To prevent the condensate entering into circulation in the appliance, check and empty the air
filter weekly by performing the following operations:
Position an absorbent cloth underneath
the appliance to collect the condensate;
CAUTION: This maintenance
operation must be performed with the
appliance on in order for the air circuit
to be pressurised.
With the appliance on and in a perfectly
horizontal position, press the air filter
vent valve positioned on the bottom of
the appliance, until just air escapes.
NOTE: However, it is recommended
to use dry compressors and introduce
a dehumidifier into the practice's
pneumatic circuit.
9.4 Cleaning the Powder Containers and Caps
Check cleanliness of the powder container
and, in particular, the cap as powder residues
CAUTION: Always switch the
appliance off using the I/O switch and
disconnect it from the mains electricity
before cleaning the powder containers
and the caps.
WARNING: Before blowing
compressed air into the powder
containers, make sure that they have
been emptied.
Blow compressed air inside the container
and on the threading of both the powder
containers and the caps.
1
2
in the presence of moisture could solidify and
make opening and closing operations difficult.
1
MAINTENANCE
101