Additional Functions - JBM 54040 Manual De Instrucciones

Ocultar thumbs

Contenido

página de 35

/ 35
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

REF. 54040

Charging Test Result

Charging voltage: Normal. Generator output is

normal, no problem detected.

Charging voltage: Low. Check if the generator

drive belt slips or shifts. Check whether the con-

nection between the generator and the battery is

normal or not. If both the drive belt and connec-

tion are in good condition, follow the manufactu-

rer's suggestions to eliminate the generator fault.

Charging voltage: High. Since most vehicle ge-

nerators use an internal regulator, the generator

assembly must be replaced (some older style

cars are using an external regulator, then replace

the regulator directly). The normal voltage of the

voltage regulator is a maximum of 14.7±0.5V. If

the charging voltage is too high, it will overchar-

ge the battery. Therefore, the battery life will be

shortened, and problems will be caused.

No volt output: No volt output from the generator

is detected. Check generator connection cable,

generator drive belt and engine if normal or not.

Diode test: Through the charging current ripple

test, the tester will find out whether the diode

is normal or not. When the ripple voltage is too

high, it shows that at least one diode is damaged.

Check and replace the diode.

Review Data

After entering the fourth function, press the OK key to

view the final test result.

Print Data

Print the last test result with the printer of this battery

tester.

Export Data

Connect this battery tester to computer with Data Line

and export the data to computer. (Connect our com-

pany to get the latest software).

PAPER REPLACEMENT

Open the clear cover.

Insert replaced paper roll into the paper feeding

for auto running the paper into the printer.

Pull the paper slowly and straightly from the pa-

per roll in the chamber.