Technical Data - Goodyear GY 750CT Instrucciones De Montaje

English
Owner´s manual
•
Maintenance during the storage period
1) During the storage period of the machine, the storage requirements mentioned above must be
complied with.
2) Examine abnormal phenomena such as rust, corrosion, aging and deformation and parts every month,
find out the problems and eliminate them in time.
3) The engine crankshaft should be turned every two months to prevent internal rusting. Remove old
grease and replace new grease in the lubrication area where grease is needed.
4) Forklifts should be started every three months and driven at low speed for 20-30 minutes to check for
abnormal phenomena in all parts.

6. TECHNICAL DATA

Model
Engine
Displacement
Power rating
Maximum power
Speeds
Clutch
Freno
Number of track nodes
Track width
Distance to the center of the runway
Minimum ground clearance
Minimum turning distance
Minimum climbing capacity
(without load)
Dimensions
Maximum load capacity
Unladen weight
For further details, please refer to the motor's instruction manual.
36
GY 750CT
4T (OHV)
212 cc
4,4 kW / 3600 rpm
5,3 kW - 7 hp
First gear: 2.3 km/h
Second gear: 3.4 km/h
Third gear: 4.8 km/h
Reverse: 2.1 km/h
Belt
Internal expansion
38
180 mm
660 mm
130 mm
2,5 m
≥25º
2035 x 890 x 1190 mm
750 kg
270 kg