Goodyear GY 750CT Instrucciones De Montaje página 31

English
Owner´s manual
•
If the connecting rod is deformed or damaged
Link
If the connection piece is loose and if the opening pin
is defective
If there are cracks and deformations in the chassis and
the body
Frame and body
If installation bolts and nuts are loose or falling off
Label Labels must be clean and undamaged
Caterpillar
• Tracks must be used within their tension range to prevent them from coming off and shortening their
service life.
• When tightening, make sure it stays in a fixed position to prevent it from slipping out.
Spot check
1) The machine should be on the ground as
horizontal and stable as possible.
2) Confirm that the maximum deflection of the top
layer of the track is 2-3 cm (as shown in the figure on
the right).
Adjustment
1) The machine should be on the ground as
horizontal and stable as possible.
2) Loosen the locking nut.
3) Adjust the adjusting nut to confirm that the
maximum deflection of the top layer of the track is
2-3 cm.
4) Tighten the locking nut.
(1) Adjusting nut
(2) Locking nut
V-belt
When the V-belt slips, please adjust the tension of the belt tensioner, otherwise, it will shorten the belt life.
Inspection
1) Remove the belt cover.
2) Check the V-belt. If there is any damage, contact your
nearest dealer for timely replacement.
3) Reinstall the belt cover.
(1) Belt cover
·
·
·
·
· ·
2 - 3 cm
1 2
·
·
·
·
·
1
31