Fm Mode; Scan Setting; Auto Scan - Medion MD 43320 Manual De Instrucciones

11. FM mode

You can listen to radio via the FM band in this mode.
 Fold up the antenna.
 Briefly press and hold the
 If necessary, press the Mode button several times until FM is shown on the dis-
play.
Unlike in DAB mode, a station search must first be started here.
The selected FM frequency and the antenna symbol with the current reception
strength are shown on the display. In principle, the more vertical bars that are
displayed, the better the reception.
If you have poor reception or no reception, adjust the antenna position
or the device location.

11.1. Scan setting

Set which ratio stations are to be stored in case of an automatic station search.
 Press the Menu button.
 Use the Enter Tune -/+ controller to select the <Scan setting> menu and press
the Enter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select <Strong stations only> and press
the Enter Tune -/+ controller to confirm your selection.
Only stations with good, strong reception are stored.
 Use the Enter Tune -/+ controller to select <All stations> and press the Enter
Tune -/+ controller to confirm your selection.
All stations received are stored.

11.2. Auto scan

 Press and hold the Enter Tune -/+ controller to start an automatic station search.
All stations found are stored by frequency.
button to switch on the radio.
DE
EN
NL
FR
IT
ES
57