Safety Information - TECE TECEprofil WC-Modul Instrucciones De Uso

3. Safety information

Intended use
EN
The TECE hygiene flush is designed exclusively for use in potable water instal-
lations. The hygiene flush aids the retention of potable water quality by draining
stagnating water when not in use. The hygiene flush can be incorporated as
an optional consumer in a looped ring installation or as the last consumer in a
looped series installation.
Safety information
• The assembly and initial operation may only be performed by suitable spe-
cialist personnel.
• Adjust the flush programmes to the structural conditions. The parameters of
the factory settings may deviate from the actual parameters.
• The electrical connection may only be established by suitable specialist
personnel.
• Do not perform any repairs or amendments to the TECE hygiene flush. This
should only be done by suitable specialist personnel!
• Do not install the hygiene flush in rooms subject to frost.
• The use of a TECE hygiene flush does not relieve the obligation towards
proper planning and implementation of the potable water installation in
accordance with recognised engineering practice.
Caution: As soon as a current is connected, the TECE hygiene flush
will begin working on the factory settings and flushing water. Howe-
ver, if no ceramics have been installed at this point, the flushing
water cannot be guided into the drain and will flow out of the flush
pipe!
22