Dometic CT 4050 Instrucciones De Montaje página 26

Installing the cassette toilet
Attaching cassette toilet CT(E)4xxx
1. Place the cassette toilet in the desired position.
2. CT4xxx only: Tightly fasten the base plate with six bolts (4.5 x 45 mm, not
included) (fig. a, page 10).
3. Bolt the cassette toilet housing to the wall (using a maximum of 7 bolts, not
included) (fig. b, page 10).
4. CT4110 only: Place the two covers over the fastening screws in the base plate
(fig. c, page 11).
Installing the control and operating panel of the CT(E)4xxx cassette toilet
Install the control and operating panel in the wall in the immediate vicinity of the cas-
sette toilet at an easily accessible location.
I
NOTE
Use the scale template to make the wall cutout (fig. d, page 11).
1. Prepare an opening in the installation box for the control and operating panel
(fig. e 1, page 12).
2. Connect the electrical cables to the connections of the control and operating
panel (chapter "Electrical connection" on page 29).
!
CAUTION!
There is a risk of injury due to the springs springing back.
3. CT 4xxx only: Press in the retaining springs of the control and operating panel
(fig. e 2, page 12).
4. Push the control and operating panel into the wall cutout (fig. e 3, page 12).
5. Follow the instructions in chapter "Connecting the water supply" on page 27.
6. Slide in the mobile tank cassette (fig. f, page 12).
6.5 Installing models CTLP4xxx, CT(E)S4xxx, CTW4xxx
These models have a wall connection console. The control and operating panel is
integrated in the wall connection console.
Models CTLP4xxx and CT(E)S4xxx have no water tank, while model CTW4xxx has
an integrated water tank.
26
CT(E), CTLP, CT(E)S, CTW
EN