Disposal And Recycling - Scheppach HS105 Traducción Del Manual De Instrucciones Original

Connections and repair work on the electrical equip-
ment may only be carried out by electricians.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Data of machine type plate
• Motor data - type plate
m overload protection (Fig. 7)
• This electric tool is equipped with overload protec-
tion. If the overload protection has triggered, pro-
ceed as follows:
• Disconnect the electric tool from the power supply.
• Allow the electric tool to cool down.
• Check the electric tool for any damage. Have any
damage repaired before commissioning again.
• Connect the electric tool to the power supply.
• Press the overload switch (k).
• Switch on the electric tool as described and put it
into operation.

15. Disposal and recycling

The device is supplied in packaging to avoid
transport damages. This packaging is raw
material and can thus be used again or can
be reintegrated into the raw material cycle.
The device and its accessories are made of
different materials, such as metals and plas-
tics. Take defective components to special
waste disposal sites. Check with your spe-
cialist dealer or municipal administration!
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
handed over at the intended collection point. This can
be done, for example, by returning it when purchasing
a similar product or delivering it to an authorised collec-
tion point for the recycling of old electrical and electron-
ic devices. Improper handling of waste equipment may
have negative consequences for the environment and
human health due to potentially hazardous substances
that are often contained in electrical and electronic
equipment.
42 | GB
By properly disposing of this product, you are also con-
tributing to the effective use of natural resources. You
can obtain information on collection points for waste
equipment from your municipal administration, public
waste disposal authority, an authorised body for the
disposal of waste electrical and electronic equipment
or your waste disposal company.
www.scheppach.com