Adjusting The Sawing Angle; Mitre Saw Angle Cutting - HOLZMANN MASCHINEN TK305 Manual De Intrucciones

17.4.1 Adjusting the sawing angle

The default angle between the saw blade and the circular pan
is 90°. Use a 5mm hex key to check the angle between the
saw blade and the circular pan.
1. Loose the "Mitre swing and control angle knob"
2. Loose the "verticalis lock screw, Then swing the mitre
handle when the indicator stay a 0°.
3. Use a 5mm hex key to check the "verticalis lock screw":
Loose the lock screw and lock screw adjusting screw in or
out to achieve a 0° angle. Retighten the lock nut.
4. Tighten the "mitre swing and control angle knob".
Reset the cutting head. It will be used to bevel cutting
now.
Cutting head designed and provide to bevel cutting angle
are between 0°~ 45° at left side.

17.4.2 Mitre saw angle cutting

1. Location the cutting object by "clamp groupware";
2. According to your actual required of cutting angle to select and locate it.
3. Hold the handle and trigger switch with your hand;
4. To the left side of the swing cutting head;
5. Press the "cutting head" until it to server. Release and
reset the cutting head.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
OPERATION
38
TK 305