Cleaning And Maintenance; Accessories And Replacement Parts; Troubleshooting - Beurer BM 28 Manual De Instrucciones

• If you want to delete the whole memory for a specific
user, press the memory button M. Press and hold the
memory button M and the SET button simultaneously
for 5 seconds.

7. CLEANING AND MAINTENANCE

• Clean the device and cuff carefully using only a slightly
damp cloth.
• Do not use any cleaning solutions or solvents.
• Under no circumstances hold the device or cuff under
water, as this can cause liquid to enter and damage the
device and cuff.
• If you store the device and cuff, do not place heavy ob-
jects on the device and cuff. The cuff line should not be
bent sharply.
• Remove the batteries if the device is not going to be
used for a long period of time.
8. ACCESSORIES AND
REPLACEMENT PARTS
Accessories and replacement parts are available on the
homepage www.beurer.de, under "Service". Please state the
corresponding order number.
Designation
Universal cuff (22-42 cm)
Item number and/
or order number
163.911
33
Designation
Mains part (EU)
Mains part (UK)

9. TROUBLESHOOTING

Error Possible
mes- cause
sage
Unable to re-
cord a pulse.
You moved or
spoke during
the measure-
ment.
The cuff was
not attached
correctly.
An error occur-
red during the
measurement.
Item number and/
or order number
071.95
072.05
Solution
Please wait one minute and
repeat the measurement.
Ensure that you do not
speak or move during the
measurement.
Please observe the informa-
tion in chapter "Attaching
the cuff".
Please wait one minute and
repeat the measurement.
Ensure that you do not
speak or move during the
measurement.