Important Recommendations; Working Area; Electrical Safety - TRAPP TRP 30 Manual De Instrucciones

Trituradores / picadoras de pasto
Ocultar thumbs Ver también para TRP 30:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

www.trapp.com.br
Congratulations!
You have just acquired a quality product with the highest tecnology developed by
TRAPP. This product was designed to work quickly and efficiently, providing total
safety, at low cost.
Safety measures should be followed to operate this equipment.
The safety measures stated in this operating instructions do not cover all possible
situations which may occur during usage. The operator must be aware that good
sense, attention, and precautions cannot be incorporated into the product, therefore
caution should be taken when operating and servicing TRAPP shredders.
Attention!
Read all the instructions in this manual
before operating the equipment. Always
observe and follow the safety indications
to prevent accidents and/or injuries.
Read and keep these instructions
When using the crusher/chopper, always follow the
basic safety precautions to reduce risks, as follows:

1 - Working area

Do neither use the equipment near explosive

environments nor near flammable liquids, gases
and/or dust under suspension. The equipment
electrical installation produces sparks that may ignite
flammable liquids, gases or dust under suspension.
Keep children and away. People, especially

children, must remain at a safe distance from the
working area when the equipment is being used.
The operator/ user is responsible for accidents that
may occur.
Never leave the engine running in closed rooms

or non-ventilated places. The exhaust gas
(TRP 40G and TRP 400G) contain carbon
monoxide, a lethal and inodorous gas.

Important Recommendations

2 - Electrical safety

Do not expose the equipment to either rain or

humidity. Install the equipment in a dry place,
protected from weather conditions. Water inside
the equipment can damage the electric circuit of
the motor, besides increasing the risk of an electric
shock.
Before installing your, make sure the electrical

voltage in your property coincide with the electric
motor. Connecting electrical cables in a different
voltage will cause immediate motor burnout
resulting in a loss of warranty, when turning on an
electric engine.
For your safety, ground the equipment (when using

an electric engine). Failure to do so may result in an
accident, electrical shock or personal injury.
If you need maintenance and spare parts, get in
touch with you local distributor or an authorized
technical assistant:
In case of further difficulties, get in touch with:
METALÚRGICA TRAPP LTDA.
Av. Pref. Waldemar Grubba, 4545 - Cx.P. 106
89256-502 Jaraguá do Sul - SC - Brasil
Phone: +55 47 3371-0088 / +55 47 2107-8800
Fax: +55 47 3371-1997
39
Tabla de contenido
loading

Este manual también es adecuado para:

Trp 40Trp 40gTrp 400eTrp 400g

Tabla de contenido