Steinberg Systems SBS-LZ-2000SLS Manual De Instrucciones página 20

f) The device is not a toy. Children must be supervised to ensure that they do not
play with the device.
g) Do not put your hands or other items inside the device while it is in use!
2.4.
a) Do not overload the device. Use the appropriate tools for the given task. A
correctly-selected device will perform the task for which it was designed better
and in a safer manner.
b) Do not use the device if the ON/OFF switch does not function properly (does
not switch the device on and off). Devices which cannot be switched on and
off using the ON/OFF switch are hazardous, should not be operated and must
be repaired.
c) Make sure the plug is disconnected from the socket before attempting any
adjustments, accessory replacements or before putting the device aside. Such
precautions will reduce the risk of accidentally activating the device.
d) Disconnect the device from the power supply before commencement of
adjustment, cleaning and maintenance. Such a preventive measure reduces
the risk of accidental activation.
e) When not in use, store in a safe place, away from children and people not
familiar with the device who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
f) Keep the device in perfect technical condition. Before each use check for
general damage and especially check for cracked parts or elements and for any
other conditions which may impact the safe operation of the device. If damage
is discovered, hand over the device for repair before use.
g) Keep the device out of the reach of children.
h) Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
i) To ensure the operational integrity of the device, do not remove factory-fitted
guards and do not loosen any screws.
j) When transporting and handling the device between the warehouse and the
destination, observe the occupational health and safety principles for manual
transport operations which apply in the country where the device will be used.
k) Avoid situations where the device stops working during use due to excessive
loading. This may result in overheating of the drive elements and damage to
the device.
l) Do not touch articulated parts or accessories unless the device has been
disconnected from the power source.
m) Do not move, adjust or rotate the device in the course of work.
Manual rev. 10.02.2021
Safe device use
5 of 12