Changing The Default Settings - Denon DVD-2910 Instrucciones De Operación

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 148
ENGLISH
8

CHANGING THE DEFAULT SETTINGS

Make the initial settings to suit your usage conditions before starting playback.
2
The initial settings are retained until they are next changed, even
if the power is turned off.
ON / STANDBY
1
1
Turn on the power.
• Press the power button, the power indicator lights
green and the power turns on.
When pressed again, the power turns off and
1
indicator is off.
• In the standby mode (the power indicator lights
red), press the ON/STANDBY button on the main
unit or POWER ON button on the RC-985.
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE: For some menus, the initial values can be
changed during playback.
LANGUAGE SETUP
Use this to set the language to be used when
playing the disc. If the set language is not offered
on that disc, the discs default language is set.
And use this to set the language for the default
setting screen and messages displayed on the TV
screen ("PLAY", etc.).
2
DIGITAL INTERFACE SETUP
Use this to set the output of DVI, HDMI,
terminals.
VIDEO SETUP
Use this to set the DVD-2910's screen mode.
(TV aspect, TV type and AV1 video output.)
AUDIO SETUP
Use this to set the DVD-2910's audio output
mode.
(Digital and LPCM output settings.)
Use the
and
cursor buttons to select the desired
0
1
setting item, then press the ENTER button.
Select "LANGUAGE SETUP". (See page 15.)
Select "DIGITAL INTERFACE SETUP". (See page 17.)
3
Select "VIDEO SETUP". (See page 18.)
Select "AUDIO SETUP". (See page 19.)
Select "RATINGS". (See page 22.)
Select "OTHER SETUP" (See page 23.)
To exit the setup mode
Use the ª cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit
by pressing the SETUP button on the remote control unit.
14
2
1
3
(Green)
ON / STANDBY
Main unit
ON / STANDBY
(Red)
POWER ON
Main unit
Remote control unit
RATINGS
Use this to disable playback of adult DVDs so
that children cannot watch them. Note that
playback of adult DVDs cannot be disabled if the
rating level is not recorded on the DVD, but that
it is possible to disable playback of all DVDs.
OTHER SETUP
These include special settings such as CAPTIONS,
WALL PAPER , etc,.
SETUP
L ANGUAGE SE TUP
D I AL OG
ENGL I SH
SUBT I T L E
ENGL I SH
D I SC MENUS
ENGL I SH
ENGL I SH
OSD LANGUAGE
Remote control unit
E X I T SE TUP
SE L EC T :
DE C I S I ON : ENTER BUT TON
Remote control unit
Setup items for use
Bold characters indicate factory defaults.
LANGUAGE SETUP
DIALOG
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
OTHERS
SUBTITLE
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
OTHERS
DISC MENUS
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
OTHERS
OSD LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
DIGITAL INTERFACE SETUP
HDMI/DVI
NORMAL
BLACK LEVEL
ENHANCED
(without HDMI Y Cb Cr)
HDMI AUDIO SETUP
2CH
MULTI(NORMAL)
MULTI(LPCM)
HDMI SPEAKER SETUP
VIDEO SETUP
TV ASPECT
4:3 PS
4:3 LB
WIDE (16:9)
TV TYPE
NTSC
PAL
MULTI
VIDEO OUT
PROGRESSIVE
INTERLACED
PROGRESSIVE
AUTO1
MODE
AUTO2
VIDEO1
VIDEO2
VIDEO3
SQUEEZE MODE
OFF
ON
AV1 VIDEO OUT
VIDEO
S-VIDEO
RGB
The display depends on the connected device.
SPEAKER
FRONT SP
LARGE
CONFIGURATION
SMALL
CENTER SP
LARGE
SMALL
NONE
SUBWOOFER
YES
NO
SURROUND SP
LARGE
SMALL
NONE
CHANNEL LEVEL
TEST TONE
OFF
AUTO
MANUAL
FRONT LCH
0 dB
CENTER
0 dB
FRONT RCH
0 dB
SURROUND RCH
0 dB
SURROUND LCH
0 dB
SUBWOOFER
0 dB
DISTANCE
DELAY TIME
METERS
FEET
FRONT LCH
3.6 m
FRONT RCH
3.6 m
CENTER
3.6 m
SURROUND LCH
3.0 m
SURROUND RCH
3.0 m
SUBWOOFER
3.6 m
DEFAULT
ON
Tabla de contenido

Solución de problemas

loading

Tabla de contenido