Putting into operation • Puesta en marcha
Mise en service • Colocação em funcionamento
1
Utilisation • Operação
18
2
water
agua
eau
água
Operation • Servicio
Filter
The QWIK-PURE
supplied by the manufacturer is equipped
with a filter set.
Check the correct seat of the filters before
putting the unit into service:
- Open container lid.
- The handles of the main filter must be
locked into place on the inner wall.
- When closing the housing lid, fit the
prefilter onto the guide pipe.
Fill QWIK-PURE
3
• Fill water into the main container
• Shut off water when it starts to come
out at the water outlet.
The water level will sink due to the gradual
water intake of the filter.
• Fill up with clean water as required.
The QWIK-PURE
• Compressor condensate can now flow
into the QWIK-PURE
relief chamber.
Note:
Open the outlet of the condensate
drain!
Check all connections for leaks!
The service valve is closed during ope-
ration.
To ensure trouble-free operation, observe
all the points listed under Maintenance
(see page 20-25):
Note:
The constituents of the compressor
condensate will depend on the specific
application.
It is part of the operator's duty of care to
take the necessary precautions, where
appropriate.
english
oil-water separator
®
with clean water
®
is ready for operation:
®
via the pressure
®
english
QWIK-PURE
200, 350
®
