Solving Problems - Lacor PRECISE Instrucciones De Uso Y Mantenimiento

Problems
Machine does not work
Water temperature does not
increase
Water goes on heating after the
set temperature is reached
E01 appears on the display
The device is turned on but
nothing appears on the screen
The pump is noisy
48

SOLVING PROBLEMS

Raisons
1 - The cord is not plugged in
properly
2 - There is a problem with the
electrical current.
1.- Set temperature below or
close to the water
temperature
2.- Set heating time is too short
1.- Program is wrong
2.- Temperature sensor is invalid
1.- Machine does not be put into
water
2.- Water level is too low
1 - The device is not working
correctly.
1 - There is air in the pump
2 - The pump is dirty
Solution
1 - Plug the device into an
appropriate outlet.
2 - Make sure all other electrical
devices are working normally.
If they are not working
correctly contact a technician.
1.- Check the setting.
2.- Prolong the heating time.
1 - Stop the programme and start
it again.
2 - Contact the technical service
for repair.
1.- Put the machine into water
and push 2 times on / off
button
2.- Add water, make sure the
water level is between the
MIN and MAX line
1 - Contact the technical service
for repair.
1 - Shake the device after putting
water in it so the air in the
pump is released.
2 - Follow the cleaning
instructions to clean the
device.