Operation; Opening The Web Application Via The Hotspot; Managing The Home Setup; Adding An Eebus Device - Porsche 9Y0.915.686 Manual

Operation

Opening the web application via
the hotspot
The web application can be opened using an end
device (PC, tablet or smartphone) via a hotspot set
up by the energy manager.
e
To open the web application while a hotspot
is active, enter the following IP address in the
browser's address line: 192.168.9.11
Information
− The manner of entering the network key for
opening the web application depends on the end
device's operating system.
− Depending on which browser you are using, the
web application will not open immediately; in-
stead information about the browser's security
settings will be displayed first.
Logging into the web application
Two users are available for logging into the web ap-
plication: HOME USER and CUSTOMER SERVICE.
The CUSTOMER SERVICE role is intended for the
qualified electrician who sets up the energy manager.
30
Fig. 8 Energy manager web application (OVERVIEW)
Power sources
A
Current flow
B
Power consumers
C
Energy
D

Managing the Home Setup

b Logged into the web application as Home user.
e
Configure the home setup. HOME SETUP in-
cludes the following points:
– Configuring the energy manager for the ex-
isting electrical loads
– Prioritization and management of charging
processes when using several chargers
–
Activating functions, such as Overload pro-
tection, Self-consumption optimization and
Cost-optimized charging

Adding an EEBus device

To ensure the energy manager functions correctly, it
is essential to connect it to an EEBus device, such as
the Porsche charger, for example. If both the energy
manager and EEBus device are in the same network,
the devices can be paired with one another.
b Logged into the web application as Home user.
b The energy manager and EEBus device are in the
same network with sufficiently good reception
(domestic network or direct connection).
1. Under Home setup e Power consumers click on
Add EEBus device to start the connection.
�� Available EEBus devices are displayed.
2. Select the EEBus device via the name and identi-
fication number (SKI).
3. Start pairing on the charger.
For information on adding the energy manager to the
charger, see
g the instructions for the
web application of Porsche Mobile Charger Connect
or Mobile Charger Plus.
g Operating instructions for the charger

Checking the functionality

e
Using the web application, ensure that the en-
ergy manager is functioning properly. To do this,
check whether the values displayed under Over-
view for the power sources and electrical loads
are plausible.