Initial Operation; Setup; Accessing The Web Application Via The Hotspot; Using The Setup Assistant - Porsche 9Y0.915.686 Manual De Instrucciones

Initial Operation

converters to the mains supply at the installation
US
locations.
Select the installation location of the energy manager
and of the power consumers with PLC functionality
FC
(such as the Porsche Mobile Charger Connect) as
installation locations for this.
ESM The actual transmission rate between the installation
locations can be displayed with the aid of evaluation
software. Transmission rates of 100 Mbit or more are
PTB
sufficient.
TR
Initial Operation
When the power supply is on, the energy manager is
RU
switched on and ready for operation:
On/Off status lights up green.
UK
To ensure the energy manager functions reliably and
with its full range of functions, the latest software
must be installed.
VIE
e After startup, perform a software update using
the web application.
HE

Setup

AR
The energy manager is set up via a web application.
On this web application, all the necessary values can
be entered and the current sensors configured.
JPN
Charging equipment that supports this function can
be added as an EEBus device.
KOR
The following information may be required to set up
the energy manager:
– Access data for the home network
CHS
– Access data for the user profile (for linking to the
Porsche ID)
CHT
– Information on electricity tariffs/prices
THA
12
Accessing the web application via
the hotspot
The web application can be opened on a device
(PC, tablet or smartphone) via a hotspot established
by the energy manager.
e To open the web application when the hotspot
has been enabled, enter the following IP address
in the address bar of your browser: 192.168.9.11
Information
– Depending on which browser you are using, the
web application will not open immediately, but
information about the browser's security settings
will be displayed first.
– The manner of entering the network key for
calling up the web application depends on the
device's operating system.
Logging on to the web application
Two users are available for logging on to the web
application: H and C
OME USER USTOMER SERVICE
e To set up the energy manager, log on to the
energy manager web application as C
. The initial passwords can be found in the
SERVICE
access data letter.
Fig. 15: Energy manager web application (O
P
A
OWER SOURCES
C
B
URRENT FLOW
P
C
OWER CONSUMER
P
D
OWER

Using the setup assistant

.
b Logged on to the web application as customer
service.
USTOMER
e Proceed as directed by the setup assistant.
The
SETUP ASSISTANT
among others:
– Settings for updates and security measures
– Establishing a network connection via WiFi,
Ethernet or PLC
– Linking the energy manager to a user profile
(Porsche ID)
– Entering tariff information for the "Cost-
optimized charging" function
)
VERVIEW
covers the following points,