Operation; Operation By The Home User; Calling Up The Web Application - Porsche Home Energy Manager 9Y0.915.686 Manual De Instrucciones

Controls Description
e
To restart the device, press the
Reset button for less than 5
Reset but-
seconds.
ton
e
To reset the passwords, press
the Reset and CTRL buttons for
between 5 and 10 seconds.
CTRL but- e
To reset the device to factory
ton
settings, press the Reset and
CTRL buttons for more than
10 seconds. All current settings
will be overwritten.
USB connection
USB con-
nection
e
For information on network connection options,
please refer to the Porsche Home Energy Man-
ager installation instructions on the Porsche
website at the following address:
https://tinyurl.com/porsche-e-help

Operation

Operation by the home user

The Web Application offers extensive configuration
options. Consult the electrician who is installing the
system and follow the instructions provided in the
Web Application.
The following steps should already have been per-
formed by an electrician so that the Web Application
can be used properly:
b The first installation of the Web Application was
performed with the necessary settings in the
installation assistant.
b The home setup was carried out, including infor-
mation on the power grid, mains phases, current
converters and power consumers.
e
Contact your electrician if these steps have
not been carried out or have not been fully per-
formed.

Calling up the Web Application

Requirements for calling up the Web Appli-
cation
For initial login to the Web Application, the following
information should be available:
–
Access data letter for logging into the Web Ap-
plication
–
Access data for your home network
–
IP address or host name of the Energy Manager
The following browsers are supported by the Web
Application:
– Google Chrome from version 57 (recommended)
– Mozilla Firefox from version 52 (recommended)
–
Microsoft Internet Explorer from version 11
–
Microsoft Edge (recommended)
–
Apple Safari from version 10
Connecting to the Energy Manager
The Energy Manager can be integrated into your
existing home network (WiFi, Powerline Communica-
tion, Ethernet) during setup. The IP address assigned
by the Web Application can then be accessed.
If there is no integration in a home network, the
hotspot of the Energy Manager can alternatively be
used. The WPS function can also be used, which
pairs the Energy Manager with the existing home
network without entering a password, e. g. with a
network router.
A direct connection to the router via an Ethernet ca-
ble is recommended, alternatively a PLC pairing with
a PLC modem.
For information on establishing network connections,
refer to the
g Home Energy Manager installation instructions.
Opening the Web Application via an existing net-
work connection
b The end device and Energy Manager are in the
same network (WiFi, PLC or Ethernet).
1. Open the browser.
2. Enter the IP address assigned during configura-
tion into the browser address bar.
– or –
Enter the host name of the Energy Manager into
the browser address bar.
Note: Some routers allow for access using the
host name.
9