Safety; Safety Principles; Intended Use - Porsche 9Y0.915.686 Manual

Safety

Safety principles

Risk of fatal injury due to
DANGER
electrical voltage!
Potentially fatal injuries as a result of electric shock
and/or burns are possible!
e
Always ensure that the system is de-energized
during all work and that it is secured against
being accidentally switched on.
e
Under no circumstances should you open the
housing of the energy manager.

Intended use

The energy manager serves primarily to ensure the
electrical energy supply (overload protection), by pre-
venting the main fuse from being triggered (building
protection).
The following are considered to be contrary to the
intended use:
–
Unauthorized modification and customization of
the energy manager
– Any other use of the energy manager beyond
that described here
The energy manager is designed as a rail-mounted
device and must be installed in compliance with the
required electrical/electronic and IT conditions.
For the electrical/electronic part, this means that the
energy manager must be installed in a suitable dis-
tributor.
USA only: In the event that no such distributor is
available in your country, you can procure one via
an authorized Porsche dealer. For information on the
optional wall-mounted distributor:
6
e
Refer to chapter "Wall-mounted distributor" on
page 8.
Disclaimer
Repairs are not possible in the event of damage
caused during transport, storage or handling. Open-
ing the housing of the energy manager invalidates
the warranty. This also applies if damage is caused
by external factors such as fire, high temperatures,
extreme environmental conditions and improper use
of equipment.
Intended use
The energy manager serves primarily to ensure the
electrical energy supply (overload protection), by pre-
venting the main fuse from being triggered (building
protection).
The following are considered to be contrary to the
intended use:
–
Unauthorized modification and customization of
the energy manager
–
Any other use of the energy manager beyond
that described here
The energy manager is designed as a rail-mounted
device and must be installed in compliance with the
required electrical/electronic and IT conditions.
For the electrical/electronic part, this means that the
energy manager must be installed in a suitable dis-
tributor.
e
Refer to chapter "Wall-mounted distributor" on
page 8.
Disclaimer
Repairs are not possible in the event of damage
caused during transport, storage or handling. Open-
ing the housing of the energy manager invalidates
the warranty. This also applies if damage is caused
by external factors such as fire, high temperatures,
extreme environmental conditions and improper use
of equipment.
Intended use
The energy manager serves primarily to ensure the
electrical energy supply (overload protection), by pre-
venting the main fuse from being triggered (building
protection).
The following are considered to be contrary to the
intended use:
– Unauthorized modification and customization of
the energy manager
– Any other use of the energy manager beyond
that described here
The energy manager is designed as a rail-mounted
device and must be installed in compliance with the
required electrical/electronic and IT conditions.
e
For the electrical/electronic part, this means that
the energy manager must be installed in a suita-
ble distributor.
Disclaimer
Repairs are not possible in the event of damage
caused during transport, storage or handling. Open-
ing the housing of the energy manager invalidates
the warranty. This also applies if damage is caused
by external factors such as fire, high temperatures,
extreme environmental conditions and improper use
of equipment.