Time And Date Settings; Take A Measurement; Install The Probe - Henry Schein MD300K2 Instrucciones De Uso

AC Power Supply
The device can be supplied by AC power through connecting the device to AC adapter.
Note: Use the AC power supply, make sure put the device in the safety and proper place and convenient
to power o .
Warnings!
• Be sure to use the adapter that specified for this device.
• Plug and unplug the adapter cautiously to avoid injuries caused to your body.
• If the device suddenly power o , please take out your finger at once, and then connect power or install
the batteries.

3 TIME AND DATE SETTINGS

Set the correct time according to the following steps:
1) Press the power switch for 3 seconds to power on the oximeter and then press the menu
button to enter the main menu, refer to the Fig.3.1.
2) Press the Navigation button to select "Date and Time" item, and then press the OK button to enter the
time setup screen, refer to Fig.3.2. Press the Navigation button adjust the value, and then press the OK
button to confirm thevalue. The date is displayed as the order of Year-Month-Day and Time of Hour-Mi-
nute (time show: 24-hour).

4 TAKE A MEASUREMENT

4.1 Install the Probe

1. Before use, check the pulse oximeter
for mechanical damage.
10
Fig.3.1 Fig.3.2