Zhermack elite HD+ Modo De Uso página 6

lockers. The use of other mixing tips does not guarantee optimal mixing and can jeopardise the
product's characteristics and end results.
- The mixing tip locker cannot be used with cartridges not from Zhermack's 5:1 mixing system.
WARNING: In sensitive subjects, vinyl polysiloxanes may cause irritation or other allergic reactions.
CLEANING AND DISINFECTION OF THE IMPRESSION
After rinsing well under running water, the impression can be immediately disinfected. Ideal
disinfecting is achieved by immersing the impression in Zeta 7 solution or spraying it with Zeta 7
spray (Zhermack). When using other disinfectants, always follow the manufacturer's instructions.
CASTING MODELS
There is no need to wait; models may be cast immediately after disinfection, or up to two weeks later,
provided that the impression is kept at room temperature. Elite HD+ is compatible with all the best
plasters on the market and with polyurethane resins. We recommend Zhermack gypsum, type 4 die
stone: Elite Rock/Elite Rock Fast and type 3: Elite Model/Elite Model Fast.
CLEANING AND DISINFECTING THE DISPENSER
The dispenser can be cleaned, disinfected, and sterilised by immersion in liquid or in a steam
autoclave. We recommend Zeta 3 (Zhermack) disinfectant and Zeta 2 (Zhermack) sterilisation
liquid.
STORAGE
Impressions made with Elite HD+ must be kept at room temperature. Elite HD+ impression materials
are guaranteed for 3 years following the date of production provided they are kept at a temperature
of between 5° and 27° C / 41°- 80°F.
GALVANISATION
Elite HD+ impressions may be galvanised with copper or silver.
IMPORTANT REMARKS: Consulting services on the use of our products, provided in any form, be that verbal,
written or through demonstrations, are based upon the current state of dentistry and of our know-how. They
are to be considered as non-binding information, also in relation to possible third party claims, and do not
exonerate the user from personally checking whether the product is suitable for the planned use. Use and
application by the user take place under no possible control by the Company, and are therefore under the
user's responsibility. Possible liability for damages is limited to the value of goods supplied by the Company
and utilized by the user.
Elite HD+
ISO 4823
ADA 19
Mixing ratio
Base:Catalyst
Mixing time
Total working
time*
Time in mouth
(minimum)
Setting time*
Strain in
compression
(min - max)
Recovery from
deformation
Linear dimen-
sional variation
after 24h
Hardness
"Shore A"
*The times mentioned must be intended from the start of mixing at 23°C - 73°F. Higher temperatures
reduce the times, lower temperatures increase them.
FOR DENTAL USE ONLY
30" Mixing time
1'30" 2'30"
Time in mouth
Working time
(max)
4'
Setting time
30" Mixing time
2' 3'30"
Time in mouth
Working time
(max)
5'30"
Setting time
Light/Super
Light Body
Regular Body
Normal Light Body
Normal Setting
Setting
Fast Setting
Type 2
Type 3 Type 3
Medium-
Light-bodied Light-bodied
bodied
Consistency Consistency
Consistency
1:1 1:1 1:1
in tube in tube Auto mixing
30'' 30'' System
2' 2' 1'30''
3'30'' 3'30'' 2'30''
5'30'' 5'30'' 4'
3 – 5% 3 – 5% 3 – 5%
> 99,5% > 99,5% > 99,5%
< 0,20% < 0,20% < 0,20%
45±2 45±2 45±2
TIMES FOR CLINICAL USE
PUTTY SOFT - Fast Setting
TRAY MATERIAL / TRAY MATERIAL MAXI
LIGHT BODY - Fast Setting
SUPER LIGHT - Fast Setting
PUTTY SOFT - Normal Setting
MONOPHASE / MONOPHASE MAXI
LIGHT BODY - Normal Setting
REGULAR BODY - Normal Setting
Putty Soft Putty Soft
Monophase Tray Material
Putty Soft Putty Soft
Monophase Tray Material
Maxi Maxi
Maxi Maxi
Normal Setting Fast Setting
Type 2
Type 1 Type 0 Type 0
Medium-
Heavy-bodied Putty Putty
bodied
Consistency Consistency Consistency
Consistency
1:1 1:1 1:1 1:1
5:1 5:1 5:1 5:1
30'' 30''
Auto mixing Auto mixing
Auto mixing Auto mixing
System System
System System
2' 1'30'' 2' 1'30''
3'30'' 2'30'' 3'30'' 2'30''
5'30'' 4' 5'30''
3 – 5% 3 – 5% 1 – 3% 1 – 3%
> 99,5% > 99,5% > 99,0% > 99,0%
< 0,20% < 0,20% < 0,20% < 0,20%
54±2 60±2 60±2 60±2
4'