Redmond RMC-M90E Manual Del Usuario página 11

A2
Control Panel ( , p. 5)
Multicooker REDMOND RMC-M90E is equipped with a touch control panel
with color LED multifunction display.
1. "Reheat/Cancel" button disables/reactivates the Reheat function, inter-
rupts the program and cancels all settings.
2. "Time Delay" button is used to enter the time setting mode in Time
Delay function.
3. "Temperature" button is used to adjust the temperature in "MULTI-
COOK".
4. "Hour" button is used to adjust the hours in time setting Time Delay
modes.
5. "Min" button is used to adjust the minutes in time setting Time Delay
modes.
6. "Quick Cook" button starts "QUICK COOK" program.
7. "Menu/Keep Warm" button is used to select an automatic cooking
program and to disable the Keep Warm function in advance.
8. "Start" button starts the cooking program.
9. Display.
Display ( A3 , p. 6)
1. "QUICK COOK" program indicator
2. Operating program/Reheat function indicator
3. Cooking stage indicator
4. "MULTICOOK" temperature indicator
5. "Time Delay" indicator
6. Indicator of the timer operation
7. Timer
8. Selected program indicator
I. PRIOR TO FIRST USE
Carefully remove the multicooker and its accessories from the packaging.
Dispose of all packaging materials.
Keep all warning labels, including the serial number identification label
located on the housing. The absence of the serial number will deprive you
of your warranty benefits!
After transportation or storage at low temperatures allow the appliance to
stay at room temperature for at least 2 hours before using.
Wipe the housing of the appliance with a soft, damp cloth. Rinse the inner
bowl with warm soapy water and dry thoroughly. An odour on first use of
the appliance is normal and does not indicate a malfunction. In such case,
clean the appliance, following "Cleaning and Maintenance").
Place the appliance on a hard, even, horizontal surface so that the steam
from the valve will not come into contact with wallpaper, decorative cover-
ings, electronic devices or other items or materials which could be damaged
by high humidity or temperatures.
Before use, make sure there are no chips or other defects on the outside or
visible inside parts of the multicooker. There should be nothing caught
between the bowl and the heating element.
ATTENTION! It is forbidden to lift the device with the filled bowl by the
handle.
Do not switch on the device without the bowl installed or with empty bowl
inside. In case of accidental start of a cooking program, it may result in critical
overheating or damage of the anti-stick coating. Before frying, pour inside a
little vegetable or sunflower oil
ATTENTION! It is forbidden to lift the device by the handles of the bowl!
II. OPERATION
Setting The Cooking Time
Multicooker REDMOND RMC-M90E allows manually adjusting the cooking
time, set by default for each program (except "QUICK COOK"). Time adjustment
range and interval depend on the program of cooking selected. To set:
1. Select the cooking program. Press "Hour" button repeatedly to adjust
the hours. Hold the button down to scroll through the digits.
2. Press "Min" button repeatedly to adjust the minutes. Hold the button
down to scroll through the digits.
3. To set the cooking time of less than 1 hour press "Hour" button repeat-
edly to reset to zero. Adjust the minutes using "Min" button.
4. When the time is set (display keeps blinking) proceed to the next
stage in accordance with the program selected. To cancel all settings,
press "Reheat/Cancel" button and reset.
IMPORTANT! Manually adjusting the cooking time, consider time adjustment
range and interval of selected program, given in the table of default settings.
For your convenience the cooking time range in all programs starts with
the minimum setting, enabling you to prolong the operating time of the
program, if the dish is undercooked.
In certain automatic programs countdown starts only when the device
reaches its operating temperature. E.g. If you set "STEAM" program on 5
minutes, the countdown of the program begins only when the water comes
to a full boil providing enough steam.
In "PASTA" program, the countdown begins after water starts boiling and "Start"
button is being repressed.
Time Delay Function
This function allows setting the program to finish by certain time. Cooking
time may be delayed for a period from 10 minutes to 24 hours with 10
minute intervals. Setting Time Delay function, take the cooking time of the
program into consideration. The time of a delay should be longer than the
cooking time of the program selected; otherwise the program starts running
right after you press "Start".
When the automatic program is selected and the temperature and cooking
time are adjusted, you may set the "Time Delay".
1. Press "Time Delay" button to enter the Time Delay setting mode. The
words Time Delay are displayed. Timer is blinking.
2. Press "Hour" button repeatedly to adjust the hours in 24 hour format.
Hold the button down to scroll through the digits.
3. Press "Min" button repeatedly to adjust the minutes. Hold the button
down to scroll through the digits.
4. If you need to set the delay of less than 1 hour, repeatedly press "Hour"
button to reset to zero and adjust the minutes using "Min" button.
5. To cancel the settings press "Reheat/Cancel" button and reset.
6. When the time is set press and hold down the "Start" button. Time
Delay function indicator lights up. Set program starts running and the
countdown begins.
7. Your meal will be ready when the time set expires. When the program
finishes, the device automatically switches to "Keep Warm" ("Reheat/
Cancel" button indicator lights up).
8. Press "Reheat/Cancel" button to cancel the "Keep Warm". Button indi-
cator goes off.
• Time Delay function is available in all automatic programs except "FRY",
"PASTA" and "QUICK COOK".
• It is not recommended to use Time Delay function if dairy and other
perishable products are being used (eggs, fresh milk, meat, cheese etc.).
• Setting the "Time Delay" in "STEAM" program remember that the count-
down starts only when the device reaches its operating temperature
(water comes to a full boil).
Keep Warm Function
Function is being automatically activated at the end of the cooking program.
When the program finishes, the temperature of the meal (70–75°C) is being
maintained for a period of time up to 24 hours.
"Reheat/Cancel" button indicator lights up and the "Keep Warm" count up is
being displayed.
Press and hold down "Reheat/Cancel" button to disable the function.
Disabling The "Keep Warm" In Advance
Automatic activation of the Keep Warm function at the end of the program
may sometimes be undesirable. REDMOND RMC-M90E allows disabling the
function in advance, while setting the program or during its operation. Press
and hold down the "Menu/Keep Warm" button to cancel the function. "Reheat/
Cancel" button indicator goes off. To reactivate the function, repress and hold
down the "Menu/Keep Warm" button ("Reheat/Cancel" button indicator goes
off).
Reheat Function
REDMOND RMC-M90E can be used for warming up cold meals. To reheat:
• Put the products into the bowl. Place the bowl inside the device.
• Close the lid until it clicks into place and plug in the unit.
• Press and hold down "Reheat/Cancel" button for a few seconds until an
audible sound is produced. Corresponding indicators light up and "re-
heating" process begins. The timer starts its countdown.
The meal will be warmed up to 70–75°C and the temperature will be
maintained for the next 24 hours. To cancel the function press and hold
down "Reheat/Cancel" button. Corresponding indicators go off.
The function may operate for a period of 24 hours, however, we recommend
using it moderately, because a prolonged thermal exposure may sometimes
affect flavor characteristics of the meal.
Standard Operating Procedure for Automatic Programs
IMPORTANT! When using the water boiling device (for example, when
boiling products), DO NOT set the cooking temperature above 100°C. It may
result in overheating and failure of the device. For the same reason, DO
NOT use the "BREAD", "FRY" and "BAKE" programs to boil water.
1. Measure the ingredients according to the recipe.
2. Put them into the bowl. Make sure that all the ingredients including
liquid are below the scale mark indicating maximum capacity. Place
the bowl inside the device. The bowl and the heating element must
fit tightly.
3. Close the lid until it clicks into place. Plug in the unit.
ATTENTION! If you cook at high temperatures with much vegetable oil,
always leave the device lid open.
4. Repeatedly press "Menu/Keep Warm" button to select the program
(corresponding indicator lights up).
5. Use "Hour" and "Min" buttons to adjust the time set by default for each
program.
GBR
RMC-M90E
FRA
DEU
ITA
ESP
PRT
DNK
NOR
SWE
FIN
ROU
HUN
BGR
HRV
CZE
SVK
SVN
POL
LTU
LVA
EST
SRB
GRC
RUS
UKR
11