La Pavoni LPSGEG03 Instrucciones De Uso página 32

Coffee leaks between the
group head and
the filter holder
No froth forms
on the coffee
The coffee is too
cold
The coffee is too hot
The machine does not
dispense steam
1. The filter holder is not
inserted correctly
2. There is too much coffee in
the filter basket
3. The edge of the filter holder
has not been cleaned
4. The group head gasket is
worn
1. The coffee blend is not
suitable for this type of
machine
2. The grinding is unsuitable
3. There is not enough coffee
1. The machine had not
reached the correct
temperature
2. The filter holder had not
been pre-heated
3. The cups have not been
preheated
4. The thermostat is not
working within the required
range
5. The PID temperature
controller (29) is not
working within the required
range
1. The PID temperature
controller (29) is not
working within the required
range
1. The circuit has not been
filled
2. The hole at the end of the
steam nozzle is clogged
3. No water in the tank
28
1. Insert it properly
2. Reduce the amount of
coffee
3. Remove coffee residues
from the edge of the filter
holder and clean the group
head gasket
4. Contact an authorised
service centre
1. Replace the coffee
2. Adjust the coffee grind
3. Increase the amount of
coffee and compact it
properly
1. Follow the instructions
given in section 4.1– 4.2
2. The filter holder should be
heated at the same time
as the water, see section
4.1– 4.2
3. Heat the cups properly on
the cup warmer (2)
4. Contact an authorised
service centre
5. Set the values for the PID
temperature controller (29)
1. Set the values for the PID
temperature controller (29)
1. See section 4
2. Clean the hole with a
needle
3. See section 4