Bosch Professional GTA 600 Manual Original página 9

OBJ_BUCH-1382-002.book Page 9 Thursday, January 12, 2017 9:50 AM
Before assembling the saw stand, check if all parts listed
below are provided:
– Base frame 3
– Saw stand legs 4 (4 pcs.)
– Fastening kit 5 consisting of:
Cross-head screws M8 x 45 (4 pcs.),
Lock nuts M8 (4 pcs.)
Additionally required tools (not in delivery scope):
– Cross-head screwdriver
– Open-end spanner (13 mm)
Assembling the Saw Stand (see figures A1 – A2)
Carefully remove all parts included in the delivery from their
packaging.
Remove all packaging material.
Undo tension latch 1 and pull the base frame 3 apart.
Insert the saw stand legs 4 into the square tubing of base
frame 3 until the mounting holes are aligned.
The saw stand legs must face outward.
Screw the saw stand legs and the base frame together with
the screws and nuts of fastening kit 5.
Fastening the Power Tool (see figures B1 – B3)
Tilt both retaining clamps 2 upward.
Slide the rear housing frame 6 of the power tool completely
into the retaining clamps 2.
Centre the power tool on the base frame.
Hang the clip of tension latch 1 over strike 7 and fold down the
latch to lock the power tool in place.
Operation
Working Advice
Do not overload the saw stand. Always observe the maximum
carrying capacity of the saw stand.
Always hold the workpiece firmly, especially the longer and
more heavy section. After cutting through the workpiece, the
centre of gravity may become dislocated in such an unfavour-
able manner that the saw stand tips over.
Transport (see figures C1–C3)
 When folding the saw stand together or apart, the
power tool may not be mounted to the saw stand.
The saw stand can be folded together for transport.
Remove the power tool.
Fold both retaining clamps 2 down.
Fold the saw stand together.
Hang the clip of tension latch 1 over the other side of base
frame 3 and fold down the latch to lock the saw stand.
Bosch Power Tools
Maintenance and Service
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can
also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
English | 9
1 609 92A 3AJ | (12.1.17)