Oven Lights; Cooking Tables - KENMORE ELITE 790.46832 Manual Del Usuario

Oven Lights

FEATURE OVERVIEW
• Operating Oven Lights
• Replacing Oven Light
Wire
Holder
Figure 1

Cooking Tables

before replacing oven light(s). Wear a leather-faced glove for protection
against possible broken glass.
To Operate the Oven Lights
Both of the interior oven lights automatically turn on when the oven
door is opened. Press
oven door is closed. Each oven light is located at the rear wall of the
oven interior and is covered with a glass shield held by a wire holder
(See Figure 1). The Glass Shields must be in place whenever the oven
is in use.
To Replace the Oven Light:
Glass
Shield
1. Turn electrical power off at the main source and unplug the range.
2. Press Wire Holder to one side to release the glass shield.
3. Replace the old bulb with a new 40 watt appliance bulb.
4. Replace Glass Shield over bulb and snap Wire Holder into place.
5. Turn power back on again at the main source (or plug in the range).
6. The clock will then need to be reset. To reset, see Setting the
Foods for
BAKE pad
*Decrease
normal cook time by:
Frozen foods, pies,
pastries and pizza
Refrigerator cookies
Refrigerator biscuits
Rolls & Breads
Fresh Pies/Pastries
Begin with the maximum reduction in
cook times and adjust as needed.
*Recommended reduction in cook
times based on brands of food items
tested. Cook times may vary with your
specific brand of food item.
Be sure the range is unplugged and all parts are COOL
Clock in this Use & Care Guide.
CONVECTION
15-25 %
15-35 %
15-30 %
20-25%
10-20 %
34
to turn the lights ON and OFF when the
Foods for MEATS pad in
Food Categories
*Decrease
normal cook time by:
Meats
Poultry (unstuffed)
Begin with the maximum reduction in
cook times and adjust as needed.
*Recommended reduction in cook
times based on brands of food items
tested. Cook times may vary with your
specific brand of food item.
15-30 %
20-30 %