Safety Instructions; Safety Symbols Used; Transportation Hazard; Machine And Tool Operating Hazards - Atlas Copco ALF 72D Instrucciones De Seguridad Y Funcionamiento

ALF 72D, ALF 72D-1, ALF 67/80D, BMK 62S, BMK 91 RS

SAFETY INSTRUCTIONS

To reduce risk of serious injury or death to yourself or
others, read these safety instructions before operating
the machine.
Post these safety instructions at work locations,
provide copies to employees, and make sure that
everyone reads the safety instructions before
operating or servicing the machine.
Follow all safety instructions given in this manual.All
the safety instructions conform to the applicable laws
and directives in the European Union.
You should also respect any additional national/
regional directives.
In countries outside the European Union, the valid
local statutes and regulations shall apply.
Any additional regional laws and regulations must be
observed.

Safety symbols used

The indications Danger, Warning and Caution have
the following meanings:
Danger
Indicates an imminently
hazardous situation which,
if not avoided, will result in
death or serious injury.
Warning
Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.
Caution
Indicates a situation
which, if not avoided, may
result in personal injury or
damage to the product or
other property.

Transportation hazard

Caution
The rock drill and the pusher leg are heavy. To avoid
personal injuries during transportation to the working
area
► Use a carriage or ask for assistance from a
colleague during transport.
Machine and tool operating
hazards
Warning
Sudden or unexpected movement of the machine
may occur during operating, which may cause
injuries. Furthermore, losing your balance or slipping
may cause injury. To reduce risks:
© 2010 Atlas Copco Construction Tools AB
Orginal instructions
www.CrowderSupply.com • Toll Free: 888-883-5144
| |
No. 9800 0680 71a 2010-01-01
Safety and operating instructions
► Make sure that you always keep a stable position
with your feet as far apart as your shoulder width,
and keeping a balanced body weight.
► Stand firmly and always hold on to the machine
with both hands.
► Do not start the machine when it is lying on the
ground.
► Make sure that the handle is clean and free from
grease and oil.
Warning
Unintentional start of the machine may cause injury.
► Keep your hands away from the start and stop
device until you are about to start work.
Warning
The working tool is exposed to heavy strains when
the machine is used and after a certain amount of use
the tool may break due to fatigue. If the tool breaks,
there may be sudden or strong movements. Such
sudden or strong movements may cause serious
injury.
► Make sure that you always keep a stable position
with your feet as far apart as your shoulder width,
and keeping a balanced body weight.
► Check regularly for wear to the working tool, and
check whether there are any signs of damage or
visible cracks.
Warning
An incorrect dimension of the working tool's shank
can result in the working tool being lost or is slipping
out during operation. A working tool that is lost or slips
out can cause personal injury.
► Before inserting the working tool, make sure that
the shank's dimensions are correct for use in the
machine.
► Working tools without a collar may not be used.
Warning
If the tool retainer on the machine is not in the locked
position, the tool can be ejected with great force,
which can cause serious injury.
► Once the working tool has been mounted and
locked, the locking function must be checked by
pulling the working tool sharply outwards.
► Make sure that the working tool is fully inserted
and that the tool retainer is in the locked position
before the machine is started.
► Never point the working tool at yourself or anyone
else.
5