Replacing The Depth Wheel; Replacing The Skirt - Stihl FC 95 Manual De Instrucciones

English

Replacing the Depth Wheel

Have the worn wheel replaced by a
specialist dealer. STIHL recommends
that maintenance and repair work be
carried out only by authorized STIHL
dealers.
Wheel
2
End of screw thread (1) is deformed
N
so that the wingnut (2) cannot be
lost
The wingnut can only be unscrewed
from the screw with lots of force. If the
parts are joined again after this, the
function of the "filler cap retainer" is no
longer assured. In this case, have the
screw and wingnut replaced with new
ones by a specialist dealer.
24

Replacing the Skirt

Removing the skirt
1
Undo and remove the screw (1).
N
Remove the washer (2)
N
Pull the skirt (3) out of the
N
segment (6) and out of the gap (5) in
the deflector
5
4
1
2
6
3
Fitting the skirt
1 2
6
3
In order to push the skirt easily into
N
the gap on the deflector, apply a thin
coating of resin-free oil to the top of
the skirt
Thread the skirt (3) into the
N
segment (6) and push into the
gap (5) of the deflector – the bore in
the skirt must be fixed in the
arbor (4)
Place washer (2) onto screw (1).
N
Insert and tighten the screw (1)
N
FC 95, FC 110
5
4